Infinix flash tool: All you Need to Know, Download and Usage.

infinix flash toolWhat is an infinix flash tool and How do you use it?

Infinix Flash tool is a software application that enables you to flash stock any MediaTek Smartphone and Tablets.

If you own latest models of infinix phones then this tool is as equally important.

In this article, you are going to learn more about infinix flash tool and how to use it.

Here are a few benefits of the tool.

  • You can bring back your dead infinix phone or tablet using this tool.
  • You can Install new updates directly to your phone when available.

How to use infinix flash tool.

Before you get started, there are some requirements you need to have for this tool to work appropriately.


  1. Flash Tool.
  2. Stock ROM.
  3. USB Cord.
  4. MediaTek VCOM Drivers.
  5. PC.
  6. Phone.

Once everything is in place, follow below the step by step guide to flash your device.

First, before you use your flash tool you need your ROM.

  • Install your MediaTek VCOM Drivers this is because without the drivers you will not be able to detect your phone.

To install your  VCOM Drivers:

  • On your computer, go to Device manager>Action>Add legacy hardware.
  • Click Next and install the hardware that I manually select from the list.
  • Click on next and navigate to the location your “VCOM drivers” are saved and install USB VCOM drivers for your PC.
  • Select drivers according to your PC spec that is windows 7, 8, 8.1 or 10  either 64bit or 86bit.
  • You might get a message saying this product is not signed do you want to proceed? click yes to continue and then finish.

Now that we have our drivers installed, go to the flash tool, right click and run as Administrator to launch the application.

  • Switch off your phone and connect USB to your computer USB Port.
  • On the flash tool application click on browse and Navigate to the location of the back up you wish to flash.
  • Click and Open the scatter file and select the green arrow to start flashing to use infinix flash1
  • Once you connect the switched off the phone via USB, the flashing will start. During this process do not disconnect your phone until it is to use infinix flash3
  • You will see a green tick showing you its to use infinix flash5
  • Put on your phone and everything should be working fine.

To Download Infinix Flash tool. CLICK HERE.